Phrozen Aqua 4K

Phrozen’s Aqua resins are developed to print with speed, producing 3D models with high-precision and durable 3D models that do not break easily.

Size: 1Kg

• Density: 1.1 g / cm3
• Viscosity: 150 cps
• Tensile Strength (Break): 2 Mpa
• Elongation: 7 %
• I-ZOD Impact Strength: 6.78 KJ/m2
• Surface Hardness, Shore D: 77
• Water Contact Angle: 35 degree
  
  
  

• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.