HIGH EXPANSION LIQUID

Oxy-phosphate investment liquid when additional expansion is required. Used with MICROFIRE phospate investment.

Working time is much longer than any other phosphate investments, 7 minutes at normal temperatures of 70F (21C). Higher temperatures will shorten the working time of all investments, lower temperatures will increase the working time of investments. Having a longer working time allows more prints to be invested with care in one ring.

When using a pressure vessel as per instructions, after a bench set the ring can be placed in a cold furnace (150F - 65C) and brought up to casting temperature (1850F - 1010C) in one hour. 30 to 60 minutes holding (depending on number of rings in the furnace) then cast.